Miniaturized matrix solid-phase dispersion and solid-phase clear-up combined with capillary electrophoresis for efficient determination of trace bioactive components in complicated sample matrix: Take Wubi Shanyao Pill as an example

Accurate quantitative analysis of trace analytes in a complicated matrix is a challenge in modern analytical chemistry. An appropriate analytical method is considered to be one of the most common gaps during the whole process. In this study, a green and efficient strategy based on miniaturized matrix solid-phase dispersion and solid-phase extraction combined with capillary electrophoresis was first proposed for extracting, purifying and determining target analytes from complicated matrix, using Wubi Shanyao Pill as an example. In detail, 60 mg of samples were dispersed on MCM-48 to obtain high yields of analytes, then the extract was purified with a solid-phase extraction cartridge. Finally, four analytes in the purified sample solution were determined by capillary electrophoresis. The parameters affecting the extraction efficiency of matrix solid-phase dispersion, purification efficiency of solid-phase extraction and separation effect of capillary electrophoresis were investigated. Under the optimized conditions, all analytes demonstrated satisfactory linearity (R²>0.9983). What's more, the superior green potential of the developed method for the determination of complex samples was confirmed by the Analytical GREEnness Metric Approach. The established method was successfully applied in the accurate determination of target analytes in Wubi Shanyao Pill and thus provided reliable, sensitive, and efficient strategy support for its quality control.     

High-performance liquid chromatography micro-fraction bioactive evaluation combined with countercurrent chromatographic separation of antioxidants from Citrus peel and their tyrosinase inhibition activities

In the present study, high-performance liquid chromatography micro-fraction bioactive evaluation and high speed countercurrent chromatography were performed on screening, identification and isolation of antioxidants from Citrus peel. Three compounds were screened as antioxidants and tyrosinase inhibitors using 2,2′-azino-bis (3-ethyl-benzothiazoline-6-sulfonic acid) radical cation scavenging assay and tyrosinase activity test, then they were identified as eriocitrin, narirutin and hesperidin. Moreover, the solvent system ethyl acetate-n-butanol-water (6:4:10, v/v/v) was used for separation of ethyl acetate extract of Citrus peel by high speed countercurrent chromatography. In total, 0.45 mg of eriocitrin with 87.10% purity, 2.04 mg of narirutin with 95.19% purity and 1.35 mg of hesperidin with 95.19% purity were obtained from 20 mg of ethyl acetate extract of Citrus peel in a single run and then each component was subjected to 2,2′-azino-bis (3-ethyl-benzothiazoline-6-sulfonic acid) radical cation scavenging assay and tyrosinase inhibition assay. Eriocitrin showed great antioxidant activity (the half-maximum concentration: 3.65 µM) and tyrosinase inhibition activity (the half-maximum concentration: 115.67 µM), while narirutin and hesperidin exhibited moderate activity. Tyrosinase inhibition activity for eriocitrin in vitro was reported for the first time. Furthermore, molecular docking between eriocitrin and mushroom tyrosinase was also studied.     

Matrix solid-phase dispersion combined with micro-fractionation bioactivity evaluation screening polymethoxylated flavones from Citrus peels

Polymethoxyflavones were a unique class of natural and safe flavonoids containing two or more methoxy groups, which were also the most abundant edible part in Citrus peel. The optimum condition in the process of selective extraction of polymethoxylated flavones from Citrus peel by matrix solid-phase dispersion (MSPD) was as follows: SBA-15 as adsorbent, ethyl acetate as eluent, the mass ratio of adsorbent to sample 1:1, and the mixture of sample and adsorbent was ground for 3 min. Twelve antioxidants were successfully screened by micro-fractionation bioactivity evaluation assay, in which four of them were flavonoid glycosides, seven of them were polymethoxylated flavones, and one was phenylpropanoid. 1-sinapoly-β-D-glucopyranoside (1) was reported for the first time in Citrus peel. And antioxidant capacity of 1-sinapoly-β-D-glucopyranoside, 5, 7, 8, 3′, 4′, 5′-hexamethoxyflavone (6), hexamethoxyflavone (11), and 5, 6, 7, 4′-tetramethoxyflavone (7) were reported for the first time. Nobiletin (compound 8), 3, 5, 6, 7, 8, 3′, 4′-heptamethoxyflavone (9) and tangeretin (10) were isolated and purified by countercurrent chromatography combined with preparative liquid chromatography. Antioxidant activity evaluation indicated that the three isolated polymethoxylated flavones owned similar antioxidant activity. This study indicated that MSPD combined with micro-fractionation bioactive evaluation was efficient in screening bioactive compounds for rapid extraction and effective pinpointing bioactive substances in natural products.     

Deoxygenation of methyl laurate to hydrocarbons on silica-supported Ni-Mo phosphides: Effect of calcination temperatures of precursor

SiO2-supported Ni-Mo bimetallic phosphides were prepared by temperature-programmed reduction(TPR) method from the phosphate precursors calcined at different temperatures. Their properties were characterized by means of ultraviolet-visible diffuse reflectance spectroscopy(UV-Vis DRS), H2temperature-programmed reduction(H2-TPR), X-ray diffraction(XRD), transmission electron microscopy(TEM), CO chemisorption, H2 and NH3temperature-programmed desorptions(H2-TPD and NH3-TPD). Their catalytic performances for the deoxygenation of methyl laurate were tested in a fixed-bed reactor. When the precursors were calcined at 400 and 500?C, respectively, Ni Mo P2 phase could be formed apart from Ni2 P and Mo P phases in the prepared C400 and C500 catalysts. However, when the precursors were calcined at600, 700 and 800°C, respectively, only Ni2 P and Mo P phases could be detected in the prepared C600, C700 and C800 catalysts. Also, in C400, C500 and C600 catalysts, Mo atoms were found to be entered in the lattice of Ni2 P phase, but the entering extent became less with the increase of calcination temperature. As the calcination temperature of the precursor increased, the interaction between Ni and Mo in the prepared catalysts decreased, and the phosphide crystallite size tended to increase, subsequently leading to the decrease in the surface metal site density and the acid amount. C600 catalyst showed the highest activity among the tested ones for the deoxygenation of methyl laurate. As the calcination temperature of the precursor increased, the selectivity to C12 hydrocarbons decreased while the selectivity to C11 hydrocarbons tended to increase. This can be mainly attributed to the decreased Ni-Mo interaction and the increased phosphide particle size. In sum, the structure and performance of Ni-Mo bimetallic phosphide catalyst can be tuned by the calcination temperature of precursor.     

Postfunctionalization of BN‐Embedded Polycyclic Aromatic Compounds for Fine‐Tuning of Their Molecular Properties

New BN‐embedded, thiophene‐fused, polycyclic aromatic compounds with planar geometry were designed and synthesized. The molecules showed excellent stability and chemical robustness. Postfunctionalization on this skeleton was demonstrated with a series of electrophilic bromination, palladium‐catalyzed cross‐coupling, and Knoevenagel condensation reactions. The π skeleton remained intact during these late‐stage transformations. The optical and electronic properties have been well tuned through incorporation of electron‐rich and ‐deficient groups on the backbone. This work shows the great advantage of the postfunctionalization strategy on BN‐containing polycyclic aromatic compounds for fast diversification and materials screening.     

g-C3N4/rGO杂化催化剂的简易合成及其对罗丹明B的光催化降解作用

在空气中直接加热三聚氰胺和氧化石墨烯(GO)的混合物制备了g-C3N4/rGO杂化催化剂.实验结果表明,混合物中的g-C3N4保留了石墨型氮化碳原始的特征结构, g-C3N4和还原的氧化石墨烯(rGO)之间的异质结主要通过π-π作用构筑.当原料中三聚氰胺/GO的质量比是800/1时,所得催化剂对罗丹明B的催化作用最强,其一阶动力学常数是纯g-C3N4的2.6倍.这种强化作用主要是由于rGO促进了光生电子-空穴对的分离.此外, g-C3N4/rGO还表现出显著的pH值敏感特性,催化降解速率随pH的降低而增加.当pH =1.98时,其一阶动力学常数是纯g-C3N4的8.6倍.这是由于酸性条件下质子(H+)消耗掉光生电子,促进了空穴对罗丹明B的氧化作用,其中rGO充当了一个快速的光生电子转移平台.     

Merging Photoredox and Nickel Catalysis: The Direct Synthesis of Ketones by the Decarboxylative Arylation of α‐Oxo Acids

The direct decarboxylative arylation of α‐oxo acids has been achieved by synergistic visible‐light‐mediated photoredox and nickel catalysis. This method offers rapid entry to aryl and alkyl ketone architectures from simple α‐oxo acid precursors via an acyl radical intermediate. Significant substrate scope is observed with respect to both the oxo acid and arene coupling partners. This mild decarboxylative arylation can also be utilized to efficiently access medicinal agents, as demonstrated by the rapid synthesis of fenofibrate.     

Aryne‐Induced Novel Tandem 1,2‐Addition/(3+2) Cycloaddition to Generate Imidazolidines and Pyrrolidines

A new “single‐flask” method was developed for the synthesis of imidazolidines and pyrrolidines with high stereoselectivity. First, a Schiff base was arylated with an aryne. Second, an intramolecular proton transfer took place from the methylene position to the anionic aryne ring. Third, the resultant ylide reacted with a second equivalent of the same Schiff base in situ or an electron‐deficient alkene through a (3+2) cycloaddition. These sequential tandem 1,2‐addition/(3+2) cycloaddition reactions led to the desired heterocycles in 63–88 % yields.     

Photoinduced Copper‐Catalyzed Regioselective Synthesis of Indoles: Three‐Component Coupling of Arylamines,Terminal Alkynes,and Quinones

The first successful example of a visible‐light‐induced copper‐catalyzed process for C? H annulation of arylamines with terminal alkynes and benzoquinone is described. This three‐component reaction allows use of a variety of commercial terminal alkynes as coupling partners for the one‐step regioselective synthesis of functionalized indoles. Moreover, the current process represents a sustainable and atom‐economical approach for the preparation of complex indoles from easily accessible starting materials under visible‐light irradiation, without the need for expensive metals and harsh reaction conditions.